High Pressure Cement Grouting Pump

High Pressure Cement Grouting Pump

1. Model: XPB-90E high pressure cement grouting pump
2. Flow capacity: 8-12.7 m³/h
3. Pressure: 14-37 Mpa
3. Cylinder number: 3
4. Cylinder diameter: 55.60.75 mm
5. Size of suction pipe: 64 mm
6. Size of discharge pipe: 19 mm
7. Motor power: 55 kw
Send Inquiry
Description
Technical Parameters

 

Application

 

This series of XPB-90E high pressure cement grouting pump can be used in the following fields:

○ Soft foundation treatment, high-pressure jet grouting;

○ High-pressure water jet assists rock breaking and coal falling;

○ Liquid supply for underground hydraulic props in coal mines;

○ Anchorage uses hydraulically expanded metal paving poles to pump high-pressure water;

○ Desilting and cleaning of large underground pipelines

○ Chemical pumps;

○ High-pressure water jet horizontal through-hole drilling;

○ Pumps for grouting for other purposes

 

Working medium

 

The working medium of XPB-90E high pressure cement grouting pump must be filtered through a mesh of more than 20 mesh to filter out harmful solid particles. If there are many solid particles in the medium, the number of filtration times needs to be increased. Common faults caused by poor filtration are as follows:

1) Since the liquid end seal of the mud pump is made of rubber, solid particles are pressed into the rubber by the valve plate under high pressure. If the particles are larger, the valve plate will be cushioned, causing sealing failure and further damaging the valve plate and valve seat.

2) If the particles are small but in large quantity, when accumulated to a certain extent, the valve plate will be cushioned, causing sealing failure and further damaging the valve seat and valve plate.

3) Since the gap between the valve plate and the limit sleeve is small, if larger particles squeeze in, the valve plate can be stuck, causing the pump to work abnormally and damaging the valve plate and valve seat.

4) Users of cement slurry should note: Due to the different cement manufacturers used, the size and quantity of iron beans in the cement are different. Please use an appropriate filter according to the situation to ensure that the high-pressure pump can work normally.

 

Parameter

 

XPB-90E

Plunger Diameter

(mm)

Motor Power

(kw)

Pressure

(Mpa)

Flow

(m³/h)

Rotation Speed

(r/min)

Stroke

(mm)

Plunger Quantity
60 55 23 8 1480 80 3
75 31
90 37
75 55 14 12.7
75 20
90 24

 

Pictures

 

high pressure cement grouting pump
High Pressure Cement Grouting Pump
high pressure cement grouting pump
High Pressure Cement Grouting Pump
high pressure cement grouting pump
High Pressure Cement Grouting Pump
Repair and maintenance

 

1) Frequently check the condition of each sealing component of XPB-90E high pressure cement grouting pump. If there is any water leakage, oil leakage or air leakage, it should be disassembled and repaired immediately, and the damaged seals should be replaced;

2) Regularly check the condition of each moving part to ensure that each lubricating part has sufficient lubricating oil;

※ Warning: Check the lubrication of the box regularly and replace the lubricating oil on time every 6 months!

3) Frequently check whether the fasteners in various parts are loose. Loose bolts will cause damage to machine parts and endanger personal safety;

4) Pay attention to whether there are abnormal noises in the moving parts. If there is any jamming, it should be eliminated in time;

5) Pay attention to check the reliability of the safety valve to ensure reliable overflow in case of overpressure;

6) Ensure the tension of the belt.

 

 

Our Services

Pre-sale service:
Design and manufacture machines for you as your special requirements, provide you with project, process design, and purchase program;
On-sale service:
Accompany with you to look around our factory, explain the manufacture process of our machine, and check the working performance of our machine;
After-sale service:
Engineers are available to install and debugging equipment of the whole production line, besides, commissioning and training operators on site.

 

FAQ

 

Q: How about the quality of machines?

A: Our machines adopt CR-Steel and advanced technology. Moreover, we carry out strict supervision during production and make sure every finished product with high quality.

Q: About the delivery time?

A: Generally, if have in stock, the machine will be about 3-5 days after your deposit, which also will be on basis of your order.

Q: As for the warranty?

A: We provide 1-2 years for warranty according to the machine.

Q: Which kind of payment is available for us?

A: T/T, L/C and Western Union are common for us.

Q: How about the service?

A: Provide overseas installation, debugging and training the relating work.

Q: What's the price of the high pressure cement grouting pump? Is there a discount on your price about this machine?

A: The price of the high pressure cement grouting pump is about $ 7,500.00.00 - $ 21,000.00. We will give you a big discount about the machine if you are willing to buy this cement grout pump.

 

Hot Tags: high pressure cement grouting pump, China high pressure cement grouting pump manufacturers, suppliers, factory, user friendly cement grout pump, grout pumping guarantee, grout pumping commissioning, grout pumping fixing agents, grout pumping emulsifiers, grout pumping inspection

Send Message