What machine is used for concrete shotcrete?

Nov 20, 2024

Leave a message

 

There are many types of machines that can be used for concrete shotcrete. The most common ones are dry mix concrete shotcrete machines, wet mix concrete shotcrete machines, and semi-wet concrete shotcrete machines. The customer can choose according to the dryness and wetness of the material.

 

 

1. Dry concrete shocrete machine: After mixing cement and aggregate in a certain proportion, compressed air is blown to the nozzle to mix with pressurized water and then sprayed out. The construction method is simple and fast, but there is a lot of dust and the rebound loss of the sprayed material is large.

 

2. Wet concrete shotcrete machine: The concrete mixture that enters the spraying machine is water-added concrete, with low dust content and reduced rebound, which is an ideal spraying method. However, wet materials are easy to condense in the material tank and pipeline, causing blockage and cleaning troubles.

 

3. Semi-wet concrete shotcrete machine: The concrete mixture is a wet material with a moisture content of 5% to 8%. The dust is reduced during spraying. Because it has less adhesion than wet materials and does not stick to the tank, it is an improved method of dry and wet methods.

 

 
concrete shotcrete
 
concrete shotcrete
Dry Concrete Shotcrete Machine
concrete shotcrete
Wet Concrete Shotcrete Machine
concrete shotcrete
Semi-wet Concrete Shotcrete Machine
Difference between wet spraying and dry spraying is mainly reflected in the following aspects

 

 

  • Equipment cost: The price of wet concrete shotcrete machine is much higher than that of dry concrete shotcrete machine. The price of a wet shotcrete machine is about $ 8,850.00 - $ 12,500.00, while the price of dry concrete shotcrete machine is much lower than that of wet concrete shotcrete machine. The price difference between the two is large, and users can choose according to the investment cost.
  • Dust and health cost: Wet spraying greatly reduces the dust concentration beside the machine and outside the nozzle, eliminating the harm to workers' health, while dry spraying may increase health and environmental protection costs due to large dust.
  • Rebound rate and material cost: The rebound rate of wet spraying is low, which can effectively control the cost. The rebound rate of dry spraying can reach 35%-50%, while the rebound rate of wet spraying can be controlled at about 15%. Therefore, the production cost of wet spraying is low and the benefit is high.
  • Production efficiency and labor cost: The productivity of wet spraying is higher, which can reach 7-9 m³/h when operated manually, while the dry spraying machine generally does not exceed 5m³/h. Wet spraying greatly saves labor costs during work and improves construction efficiency.
  • Cost of using accelerator: The wet spraying manipulator uses liquid high-quality accelerator, which is more expensive, while the cost of accelerator used by dry spraying machine is relatively low.