Introduction
Concrete gunite machine, also known as shotcrete machine or shotcrete machine, is a kind of equipment used in building construction. It is mainly used to apply concrete on the building surface by high-pressure spraying. It is suitable for tunnel reinforcement, slope support, etc. Scenes such as mine tunnels and underground engineering.
Parameters
|
Model |
CPZ-6F |
|
Capacity |
3-6 m3/h |
|
Transport Distance (horizontal) |
200 m |
|
Max. aggregate size |
≤ф20 mm |
|
Inner diameter of the feeding pipe |
ф51 mm |
|
Working Pressure |
0.6-0.8 Mpa |
|
Air consumption |
≤8 m3/min |
|
Dust concentration near the machine |
≤15 mg/m3 |
|
Feeding height |
1.1 m |
|
Rotor speed |
11 r/min |
|
Motor Power |
7.5 KW |
|
Motor speed |
960 r/min |
|
Voltage Level |
380/660 V |
|
Shape size (L * W * H) |
1785*900*1160 mm |
|
Whole Machine Weight |
900 kg |
Features
Dustproof Design
When concrete is sprayed through equipment, a large amount of dust is inevitably produced in the air. The dust removal system in the CPZ-6F concrete gunite machine uses the principle of negative pressure ventilation to quickly inhale the dust generated during the spraying process into the dust collection device, effectively reducing the dust concentration in the air and ensuring the health and safety of the operators. It can prevent dust from accumulating inside the machine, thereby extending the service life of the equipment.
Maximum Aggregate Adaptability
The feed inlet of the CPZ-6F concrete gunite machine is designed to be wide and supports a maximum aggregate diameter of 20 mm, which effectively avoids large particles of material clogging the pipeline. In applications such as tunnel reinforcement and slope protection, coarse aggregate is often used to increase the overall strength of shotcrete. The design of the equipment ensures that the coarse aggregate passes smoothly and is evenly mixed, significantly enhancing the reinforcement effect.
Feed Height Design
The feeding height of the CPZ-6F concrete gunite machine is 1.1 meters. This design is based on the consideration of workers' operating habits. By reducing the height of the feeding port, the labor intensity of workers during the feeding process is reduced, making manual feeding more efficient. , which has obvious advantages in long-term continuous operation.
Efficient Power Output
The CPZ-6F concrete gunite machine is equipped with a 7.5 kilowatt motor, and with a motor speed of 960 rpm, it can effectively fully mix large particles and fine particles in the mixture during the spraying process, preventing clogging and improving the uniformity of spraying. It is suitable for high-load and long-term construction requirements.
Applications
Tunnel Engineering
During the construction and reinforcement of tunnels, concrete gunite machines are used to spray concrete evenly on the tunnel walls to strengthen and waterproof them.
Slope Support
In slope stabilization and slope protection construction, concrete gunite machines are used to spray concrete layers to prevent rock or soil from sliding.
Mine Tunnel Reinforcement
In the reinforcement construction of underground mine tunnels, concrete gunite machines can provide a solid concrete protective layer for the tunnel walls to prevent collapse and debris from falling off.
Building Repair And Reinforcement
In the repair and reinforcement of buildings, concrete gunite machines can be used to repair walls or foundations, fill cracks and strengthen structural strength.
Dams And Water Conservancy Projects
In water conservancy projects such as dams and flood control dikes, concrete gunite machines are used to build and repair concrete surfaces to prevent water seepage and structural damage.
Pictures








