Introduction
The concrete spraying gunite machine, also known as a shotcrete machine or gunite rig, is a specialized piece of equipment used in the construction industry to apply wet concrete mixes at high velocity onto surfaces such as walls, ceilings, and floors. This technique, often referred to as shotcreting, allows for the rapid and efficient application of concrete, creating a monolithic structure that adheres strongly to the substrate. The machine typically consists of a hopper to hold the concrete mixture, a pump to generate the necessary pressure, and a nozzle through which the concrete is sprayed. Gunite machines has the different types like pneumatic, hydraulic, or electric which can meet with the different project requirements. They are widely used in tunneling, mining, slope stabilization, and repair works where traditional concreting methods would be impractical or too time-consuming.
Structure
Drive Device:
The fully enclosed, oil-immersed reducer is situated at the bottom of the machine. It is driven by three-stage gear transmission. The motor is mounted vertically on the reducer, aligning parallel to the rotor shaft.
Rotor Assembly:
This PZ-7D Concrete Spraying Gunite Machine utilizes a unique straight-through anti-stick rotor, divided into 10 material chambers. Each chamber is lined with non-stick material, enhancing the machine's ability to handle the materials while reducing the cleaning and maintenance workload.
Air Duct System:
Three ball valves manage the main airway, the upper airway leading to the rotor, and the lower airway directed towards the cyclone. A smaller air duct supplies air to the hopper vibrator, and a pressure gauge in the lower airway monitors the working pressure within the conveying pipe.
Injection System:
It includes a feed hose and a nozzle to ensures efficient material delivery. The nozzle, made from polymer material via injection molding.

Machine Blockage Problem
Blockages can occur at various points within the concrete spraying gunite machine, including the spray gun, conveying pipe, stirring device, or hopper. By closely observing the machine's condition and noting any unusual sounds, pressure changes, or performance issues, can often pinpoint the approximate location of the blockage. Common signs of a blockage include reduced output flow, erratic spray patterns, or excessive vibrations.
When the machine encounters a blockage problem during use, the machine should be shut down immediately, and then check the parts with blockage problems for maintenance care. Like cleaning the spray gun, conveying pipe, hopper, adjusting the slurry ratio...
Parameter
|
Model |
PZ-7D |
|
Capacity |
7 m3/h |
|
Transport Distance (horizontal) |
200 m |
|
Applicable Material (Cement/Sandstone) Ratio |
1:3-5 |
|
Applicable Material (Water/Ash) Ratio |
≤0.4-0.45 |
|
Max. aggregate size |
≤ф20 mm |
|
Inner diameter of the feeding pipe |
ф57 mm / ф64 mm |
|
Working Pressure |
0.6-0.8 Mpa |
|
Air consumption |
10 m3/min |
|
Feeding height |
1.1 m |
|
Rotor speed |
11 r/min |
|
Motor Power |
7.5 KW |
|
Motor speed |
960 r/min |
|
Voltage Level |
380/660 V |
|
Shape size (L * W * H) |
1700*900*1200 mm |
|
Whole Machine Weight |
900 kg |
Pictures




Company Information
Henan Tytion Machinery is an enterprise specializing in the R&D, manufacturing, and sale of construction machinery. Committed to green environmental protection and energy saving, our main products include cement/concrete/mortar grout pumps, dry/wet type shotcrete machines, mortar spraying machines, small drill rigs, and other construction equipment.

01
High Quality
Integrated factory strength to support all kinds of construction machine customization
02
Advanced Equipment
Mature technology can ensure the high efficiency of the machine
03
Professional Team
Provides customers with more comprehensive, professional and efficient technical consultation
04
Custom Service
24-hour online service to provide customers with worry-free machine after-sales service
Our Warehouse
Adequate supply ensures the timeliness of delivery




Our Services
FAQ
Q: 1. How about the quality of machines?
A: Our machines are made from CR-Steel and incorporate advanced technology. We enforce strict supervision during production to ensure high quality in every finished product.
Q: 2. What about the delivery time?
A: If we have stock, the machine will be delivered within 3-5 days after your deposit is received, based on your order details.
Q: 3. What is the warranty period?
A: We offer a 1-2 year warranty depending on the machine model.
Q: 4. How to make payment?
A: We commonly accept T/T, L/C, and Western Union.
Q: 5. What services do you provide?
A: We offer overseas installation, debugging, and training for the related work.
Q: 6. What is the price of the concrete spraying gunite machine? Do you offer any discounts?
A: The price range for the concrete spraying gunite machine is about $2,230.00 - $15,800.00. We can offer significant discounts if you are willing to purchase.




