Introduction
Refractory shotcrete machine is widely used in the field of refractory spraying such as metallurgical furnaces and boiler linings. The equipment uses a high-pressure conveying system to accurately spray the mixed refractory slurry onto the construction surface. Combined with an automated control system, the refractory shotcrete machine can significantly improve construction efficiency and material adhesion, and is especially suitable for rapid lining maintenance operations under complex structures or high-temperature conditions. Its technical advantage is that it reduces material waste while ensuring that the refractory layer is uniform and dense, extending the service life of industrial equipment.
Parameters
|
Model |
PZ-7 |
|
Capacity |
7 m3/h |
|
Transport Distance (horizontal) |
200 m |
|
Applicable Material (Cement/Sandstone) Ratio |
1：3-5 |
|
Applicable Material (Water/Ash) Ratio |
≤0.4-0.45 |
|
Max. aggregate size |
≤ф20 mm |
|
Inner diameter of the feeding pipe |
ф57 mm |
|
Working Pressure |
0.4-0.6 Mpa |
|
Air consumption |
7-15 m3/min |
|
Feeding height |
1.1 m |
|
Rotor speed |
11 r/min |
|
Motor Power |
18 HP |
|
Motor speed |
960 r/min |
|
Whole Machine Weight |
950 kg |
Advantages
Compared with traditional methods, the use of dry refractory shotcrete machine can save a lot of costs, mainly including the following aspects:
1. Energy consumption costs are lower than labor costs.
2. Material savings: Automatic spraying equipment can achieve precise control of paint spraying through precise spraying control, reduce paint waste, and save material costs.
3. Labor costs and consumption costs: Reduce labor costs; fully utilize raw materials and relatively reduce material consumption.
Effective way to deal with dust
Regarding the dust treatment of dry refractory shotcrete machine, there are several effective treatment methods:
1. Bag dust collector: A dry dust control device for a dry refractory shotcrete machine includes a bag dust collector and a shotcrete machine. The dust-containing airflow in the dust collection hood is introduced into the bag dust collector through the dust control pipe for purification. An air vibrator is set inside the bag dust collector. The vibrator is turned on regularly to vibrate the dust particles attached to the filter material, so that the dust falls to the bottom of the bag dust collector and is discharged through the dust discharge port.
2. Air ejector: An air ejector for suction is set on the bag dust collector to provide negative pressure to guide the dust-containing airflow through the dust control pipe into the bag dust collector for purification.
3. Eddy current dust control technology: Eddy current dust control technology is used to efficiently purify the spray dust and effectively reduce the dust concentration.
4. Micro-negative pressure dust control and dry dust removal: Micro-negative pressure dust control and dry dust removal technology are used to effectively control dust generated in the spraying batching process.
Pictures
Company Information
Brief Introduction
Henan Tytion Machinery Co., Ltd is a professional manufacturer and exporter that is concerned with the design, development and production of engineering machinery, road machinery, bridge and tunnel equipment, mining machinery and other products.
The cement grouting pump, mortar grouting pump, concrete pump, dry/wet type shotcrete machine, mortar plaster machine, as well as various types of mixers, etc. which produced by the company are well received by customers at abroad, and we have been constantly ensuring the steady improvement of product quality.
Our Services
Pre-sale service:
Design and manufacture machines for you as your special requirements, provide you with project, process design, and purchase program;
On-sale service:
Accompany with you to look around our factory, explain the manufacture process of our machine, and check the working performance of our machine;
After-sale service:
Engineers are available to install and debugging equipment of the whole production line, besides, commissioning and training operators on site.
FAQ
Q: How about the quality of machines?
A: Our machines adopt CR-Steel and advanced technology. Moreover, we carry out strict supervision during production and make sure every finished product with high quality.
Q: About the delivery time?
A: Generally, if have in stock, the machine will be about 3-5 days after your deposit, which also will be on basis of your order.
Q: As for the warranty?
A: We provide 1-2 years for warranty according to the machine.
Q: Which kind of payment is available for us?
A: T/T, L/C and Western Union are common for us.
Q: How about the service?
A: Provide overseas installation, debugging and training the relating work.
Q: What's the price of the refractory shotcrete machine? Is there a discount on your price about this machine?
A: The price of this refractory shotcrete machine is about $2,050.00-$2,860.00, and we will also give you a big discount about the machine, hope we can have a good cooperation.
