Introduction
Small gunite machine is a professional equipment for concrete spraying construction, mainly used in concrete spraying construction of underground projects such as tunnels, subways, culverts, etc. Its overall size is 1520*820*1280mm, weight is 700kg, and it has a compact box structure. Its working principle is to mix cement and sand with water, and spray the mixture onto the construction surface at a pressure of 0.2-0.6Mpa through a φ51mm conveying pipe.
Features
Flexible Material Ratio
The small gunite machine supports a variety of material ratios because the equipment has a built-in batching control system that can accurately control the feed amount and moisture content. This allows construction personnel to adjust the ratio according to site needs and material characteristics, so that good spraying effects can be obtained under different working conditions. For example, the water-cement ratio can be increased in a high temperature environment to prevent the material from drying quickly, while the water-cement ratio can be reduced in a cold environment to enhance adhesion.
Maximum Aggregate Adaptability
The feed port of the small gunite machine is designed to be wide, supporting a maximum aggregate diameter of 20 mm, which effectively avoids the situation where large particles of materials block the pipeline. In applications such as tunnel reinforcement and slope protection, coarse aggregate is often used to improve the overall strength of shotcrete. The design of the equipment ensures that the coarse aggregate can pass smoothly and be evenly mixed, thereby significantly enhancing the reinforcement effect.
Feed Height Design
The feed height of the small gunite machine is 1.1 meters. This design is based on the consideration of workers' operating habits. By lowering the height of the feed port, the labor intensity of workers during the feeding process is reduced, making manual feeding more efficient, and the advantages are obvious during long-term continuous operation.
Fast Rotor
The small gunite machine is equipped with a high-speed rotor of 11 revolutions per minute. This speed can effectively mix large particles with fine particles in the mixture during the spraying process, prevent blockage and improve the uniformity of the spraying.
Multiple Voltage Adaptability
The equipment has a built-in multi-voltage compatible motor system, which can automatically adapt to the working environment under different voltages to ensure stable operation of the equipment. The equipment supports two voltage levels of 380 volts and 660 volts to meet the power needs of different construction sites. It is particularly practical on some construction sites with unstable power supply or limited power conditions. It can be directly connected to the local power supply for operation without additional transformer equipment.
Parameters
|
Model |
PZ-5 |
|
Capacity |
5-5.5 m3/h |
|
Transport Distance (horizontal) |
200 m |
|
Applicable Material (Cement/Sandstone) Ratio |
1:3-5 |
|
Applicable Material (Water/Ash) Ratio |
≤0.4-0.45 |
|
Max. aggregate size |
≤ф20 mm |
|
Inner diameter of the feeding pipe |
ф51 mm |
|
Working Pressure |
0.2-0.6 Mpa |
|
Air consumption |
7-8 m3/min |
|
Feeding height |
1.1 m |
|
Rotor speed |
11 r/min |
|
Motor Power |
5.5 KW |
|
Motor speed |
960 r/min |
|
Voltage Level |
380/660 V |
|
Shape size (L * W * H) |
1520*820*1280 mm |
|
Whole Machine Weight |
700 kg |
Applications
Tunnels And Underground Projects
In tunnel excavation support projects, small gunite machines are used to spray the initial concrete support layer. This support layer can enhance the stability of the tunnel and prevent rock strata from sliding. During the construction process, the small shotcrete machine can easily shuttle in a narrow space with its small size. It is suitable for tunnels with smaller diameters, such as urban subways, small underground passages and water supply pipeline projects, and can quickly complete the reinforcement of the rock wall surface.
Mountain Slope Reinforcement
In mountain or highway slope stabilization projects, small gunite machines are often used to cover the rock or soil surface to form a stable protective layer, effectively preventing rainwater erosion and geological collapse.
Building Structure Repair
The small gunite machine can directly spray and repair the cracks and damaged areas of the building to improve the strength of the structure. Its small size design makes it suitable for use in narrower operating areas, such as bridge piers, house interior walls and other hard-to-reach areas.
Mining Support
In the mining process of the mine, in order to ensure safety, it is necessary to support the rock around the mine in a timely manner. Small gunite machines can be used for support spraying in tunnels and goafs to form a dense concrete layer to prevent rock from falling off or sliding. The internal space of the mine is small, and traditional equipment is not easy to operate. However, small shotcrete machines can still operate efficiently in narrow mine tunnels with their flexibility, reducing the difficulties in support construction caused by space limitations.
Pictures








